SDS2000X Plus and SDS5000X Default Logic Levels
May 17, 2021
The SDS2000X Plus and SDS5000X series oscilloscopes have default threshold and trigger values for the MSO/Digital channels listed below: TTL = 1.5V CMOS = 1.65V LVCMOS33 = 1.65V LVCMOS25 = 1.25V
May 7, 2021
Per OSHA, a Nationally Recognized Testing Laboratory (NRTL) is an independent third-part laboratory recognized by the United States Occupational Safety and Health Administration (OSHA) to test and certify products to applicable product safety standards. Examples of NRTLs include UL, CSA, and TUV. Many SIGLENT products are TUV certified, which also covers UL and CSA requirements. To … Continued
Are SIGLENT products certified by a Nationally Recognized Test Laboratories (NRTL)?
May 7, 2021
Per OSHA, a Nationally Recognized Testing Laboratory (NRTL) is an independent third-part laboratory recognized by the United States Occupational Safety and Health Administration (OSHA) to test and certify products to applicable product safety standards. Examples of NRTLs include UL, CSA, and TUV. Many SIGLENT products are TUV certified, which also covers UL and CSA requirements. To … Continued
SAG1021/SAG1021I output current limit
April 6, 2021
30 mA is the theoretical maximum for SAG1021/SAG1021I. I = V/R = 1.5V(max) / 50 Ohm = 30 mA
SDS2000X Plus SDS5000X Series USB/LAN specifications
March 30, 2021
USB device: USB 2.0, HS (high speed) 480Mbps LAN:100Mbps
Instrument Socket and Telnet Port Information
February 25, 2021
Product Type Product Series Socket port 5025 (Y/N) Telnet port 5024(Y/N) Digital Oscilloscope SDS5000X Y Y SDS2000X Plus Y Y SDS2000X N N SDS2000X-E Y Y SDS1000X N N SDS1000X-E Y Y SDS1104X-U Y Y SDS1000CML+ N N SDS1000DL+ N N Waveform Generator SDG6000X Y Y SDG2000X Y Y SDG1000X Y Y SDG800 N N … Continued
How do I directly control an instrument using LAN?
February 16, 2021
For convenience, we recommend connecting your instrument to your LAN using a router that can configure DHCP directly and use an internet switch to connect the LAN to the instruments you wish to control. In some cases, you may wish to directly connect your computer to an instrument LAN port without a LAN available. This … Continued
Oscilloscope Binary Data format
February 4, 2021
Data can be formatted in many different ways. Binary data formatting often provides the smallest payload size and therefore transfers via USB/LAN more quickly. Unfortunately, binary is very difficult to interpret by humans. So, binary data is often reformatted to other types (ASCII, etc..)/ Here is a link to the binary data format for many … Continued
Maximum Source Frequency for Bode Plotting with an SDS1104X-E, SDS1204X-E, SDS2000X-E Series, SDS2000X Plus Series, or SDS5000X Series Oscilloscope
December 15, 2020
Due to channel skew, Bode plotting is limited to 120 MHz for the following products: SDS1104X-E SDS1204X-E SDS2000X-E Series SDS2000X Plus Series SDS5000X Series
WiFi option SSID and Password requirements
May 15, 2020
The WiFi option for the XE oscilloscopes requires log in for the network SSID and Password. The scope does not support SSIDs or Passwords that contain Spaces or Special Characters (!, @, #, etc..) The SSID and Password for your network must not contain spaces or special characters in order to connect to the XE via the … Continued